Care instructions

Taking care of your protective clothing

The protective system used in SIP Protection clothing is a combination of a number of immobilization and speed reduction principles of the chainsaw.

Because of the unique features of the SIP Protection anti-cut material, we can manufacture products, which comply with the European Standard EN 381, and which are light, comfortable and easy to maintain.

Maintenance is of utmost importance to make sure that the independent layers within the protective inlay do not stick together, or are damaged in any way, thus decreasing the level of protection.

Compare it, if you will, to a car. Without occasionally servicing your brakes, you will not be driving safely. Each garment you will get comes with a separate manual about how to properly wash and dry.

Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

Below you’ll find a summary of the meaning of the wash & care symbols.
Find the correct washing instructions on the label in your garment.

washing-symbols

When to go for new chainsaw protective clothing?
This depends entirely on the frequency of use. When maintained properly the quality of our products assures adequate protection for a maximum amount of time.
The lifetime of your trousers will depend on the intensity of use (are you a daily or occasional user), on the roughness of the environment (thorns,... ) and on the style of trousers you have selected.

What are the main causes of a possible decrease in the level of protection?

Dirt & grease

dirt

Substances such as resin, chainsaw oil, gasoline, ... might potentially soil the protective inlay and might cause the independent protective layers to stick together.

Heat

heat

Direct contact with a heat source e.g. a hot motor.
This can induce a crusting or burning through process damaging the protective inlay and shortening the independent fibres.
Be careful, even if your outer fabric is not visibly damaged by a heat source, the fibres that lie beneath may have suffered from the heat resulting in a reduced level of protection.

Shrinkage / Tumble drying

shrinkage

Shrinkage decreases the level of protection because it might significantly reform the original shape of the protective layer.
Tumble drying of chainsaw protective clothing might disturb the shape of the protective inlay lowering efficiency.

Wrong stitching

stitch

Never stitch through the protective inlay (only the outer fabric may be repaired) as this will decrease the immobilization process in case of an accident.
Of course, cutting off a piece of the trousers decreases the level of protection.