Grizzly 2.0
Chainsaw boots, EN ISO 20345, EN ISO 17249 class 2

Starting from € 359,01

incl. VAT

The Grizzly 2.0 boots are based upon our experience in manufacturing chainsaw protective clothing and the knowhow of the Italians in boot manufacturing. Developed for groundwork, they are mainly composed of orange Hypertex and rubber reinforcement to reduce maintenance to a strict minimum and take robustness to the highest achievable level. As far as the sole is concerned, we couldn’t have chosen a better brand than Vibram®. The long lasting Vibram® Teton sole assures you grip on unstable and heavy grounds, wet or dry. A wide panel of testers were unanimous on every level: ‘’these boots are top-notch’’! What else can we say?
View all properties
Article Number 3SICA2VX1
Range Head-to-toe More info
Inside leg length (cm)

The Grizzly 2.0 provides you the following protection:


The CE/UKCA marking affixed to a P.P.E. model means that it meets the essential health and safety requirements of the European Regulation 2016/425 and the Regulation (EU) 2016/425 as they apply in Great Britain, as amended on Personal Protection Equipment (P.P.E.’s) in terms of innocuousness, comfort, robustness, and protection against the claimed risks.

EN ISO 17249 : 2013 + AC : 2014 level 2
EN ISO 20345 : 2011 SB E P HI CI WR AN WRU

The pictograms that you can find on the inside/outside of your SIP Protection P.P.E., refer to different risk levels. The higher the classification for a parameter, the higher the level of protection. Our personal care for your safety and our constant quality control, especially for P.P.E. of complex design, guarantees our excellent quality performances.

When no Standard is available and/or a model is not a P.P.E., then of course, no CE/UKCA marking is required.

More information about the standards.


  • Waterproof (WR), Heat insulation (HI), Cold insulation (CI)


  • Memory foam insole
  • Tepor breathable and waterproof membrane with 10.000mm water column waterproofness to ISO 811, Steel toe cap, Kevlar® anti-perforation sole, Basic requirements+steel toecap with impact resistance of 200J and compression of 1500 daN (SB)

Wash & Care Instructions

Our products are light, comfortable and easy to maintain. Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

Extend service life of your garments


  • 55% Polyamid - 40% Polyurethane - 5% Polyester Hypertex fabric with Putek technology ± 390g/m²
  • Waterproof reinforcement 2.0mm
Information about all our qualities