Chainsaw trousers, class 1 type A

Starting from € 242,48

incl. VAT

The already well known Innovation trousers are still standing strong as your first step towards a high comfort thanks to its very low weight and ventilation. They are composed of very hard wearing Pezatec (Cordura®) and Pezaflex (Cordura®) fabrics with Teflon™ finish and chainsaw protection based on Dyneema® yarns and have served as the starting point of our new W-AIR collection within the Innovation range.
View all properties
Article Number 1SPVAAPH5
Range Innovation More info
Inside leg length (cm)

The Innovator provides you the following protection:


The CE/UKCA marking affixed to a P.P.E. model means that it meets the essential health and safety requirements of the European Regulation 2016/425 and the Regulation (EU) 2016/425 as they apply in Great Britain, as amended on Personal Protection Equipment (P.P.E.’s) in terms of innocuousness, comfort, robustness, and protection against the claimed risks.

EN ISO 11393-2 : 2019 / Class 1 - 20 m/s design A
EN ISO 13688 : 2013

The pictograms that you can find on the inside/outside of your SIP Protection P.P.E., refer to different risk levels. The higher the classification for a parameter, the higher the level of protection. Our personal care for your safety and our constant quality control, especially for P.P.E. of complex design, guarantees our excellent quality performances.

When no Standard is available and/or a model is not a P.P.E., then of course, no CE/UKCA marking is required.

More information about the standards.


  • Bib in back
  • Front fly with zip closure - closing by 2 metal buttons
  • Elasticated waist with belt and attachment for suspenders
  • 1 inset back pocket under flap with zip closure, 1 patched thigh pocket with zip closure, 1 ruler pocket, 2 inset pockets with splashproof zip closure
  • Triple-needle stitching on the back seam to the inside leg


  • Nylnet lining for an optimal wearing comfort (100% polyester)
  • Waterproof anti-wicking fabric on the hem, on top of the protective inlay, 6 layer front protective inlay

Wash & Care Instructions

Our products are light, comfortable and easy to maintain. Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

Extend service life of your garments


  • Mesh: 40% polyamide + 60% recycled PET; ± 230 g/m2
  • High performance water- and dirt repellent with Teflon™ Pezatec outer fabric (100% high-tenacity polyamide Cordura® ± 155g/m2)
  • Water-and dirt repellent Teflon™ Pezaflex inserts (94% polyamide high tenacity Cordura® - 6% elastane; ±200 g/m²)
Information about all our qualities