Aspin Flash
HV chainsaw bib&braces, EN ISO 11393 class 1 type A, EN ISO 20471 class 2

Starting from € 140,60

incl. VAT

Looking for basic chainsaw protective Hi-Vis bib&braces? Look no further than our SIP Protection BasePro product range. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal work with a chainsaw. Don't be mistaken however. The Aspin Flash bib&braces, which are the most economic pair of SIP Protection bib&braces of our range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection.
View all properties
Article Number 1RH1NAPAP
Range BasePro More info
Colour
Inside leg length (cm)

The Aspin Flash provides you the following protection:

Standards

The CE/UKCA marking affixed to a P.P.E. model means that it meets the essential health and safety requirements of the European Regulation 2016/425 and the Regulation (EU) 2016/425 as they apply in Great Britain, as amended on Personal Protection Equipment (P.P.E.’s) in terms of innocuousness, comfort, robustness, and protection against the claimed risks.

EN ISO 11393-2 : 2019 / Class 1 - 20 m/s design A
EN ISO 20471 : 2013 +A1 2016 / Class 2
EN ISO 13688 : 2013 +A1 : 2021

The pictograms that you can find on the inside/outside of your SIP Protection P.P.E., refer to different risk levels. The higher the classification for a parameter, the higher the level of protection. Our personal care for your safety and our constant quality control, especially for P.P.E. of complex design, guarantees our excellent quality performances.

When no Standard is available and/or a model is not a P.P.E., then of course, no CE/UKCA marking is required.

More information about the standards.

Exterior

  • Front bib with pocket and vertical zipper on the right-hand side, Large bib in back
  • Front fly with zip closure, Closing right side with zipper and button
  • Elasticated backside of the waist, 2 elasticated adjustable braces with buckle closure
  • 2 inset pockets, 1 double pocket for measuring equipment and spark plug combination spanner
  • Triple-needle stitching on the back seam to the inside leg

Interior

  • Polyester - cotton lining (65% Polyester - 35% Cotton 85 g/m²)
  • 6 layer front protective inlay

Wash & Care Instructions

Our products are light, comfortable and easy to maintain. Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

Extend service life of your garments

Fabric

  • Water repellent 80% Polyester - 20% Cotton main fabric ± 200g/m²
Information about all our qualities