Forest Pro-tect
New
HV chainsaw jacket, EN 11393 class 1 type B + belly protection, EN ISO 20471 class 2

Starting from € 316,42

incl. VAT

The Forest Pro-tect jacket is the ideal 2-in-1 protective solution for arborists working on a servicing platform. It complies to EN ISO 11393 class 1 design B, offering also chainsaw protection on the abdomen, as well as to Hi-Vis EN ISO 20471 class 2. Thanks to the smart loop openings in the back or in the front at chest height, it can be fitted with the fall arrest harness underneath, thus offering much more freedom of movement.
View all properties
Article Number 1SIBA2PTP
Range Progress More info
Colour
Inside leg length (cm)

The Forest Pro-tect provides you the following protection:

Standards

The CE/UKCA marking affixed to a P.P.E. model means that it meets the essential health and safety requirements of the European Regulation 2016/425 and the Regulation (EU) 2016/425 as they apply in Great Britain, as amended on Personal Protection Equipment (P.P.E.’s) in terms of innocuousness, comfort, robustness, and protection against the claimed risks.

EN 13758-2 : 2003 + A1 : 2006 / UPF 50+
EN ISO 20471 : 2013 +A1 2016 / Class 2
EN ISO 11393-6 : 2019 / Class 1 - 20 m/s design B
EN ISO 13688 : 2013 +A1 : 2021

The pictograms that you can find on the inside/outside of your SIP Protection P.P.E., refer to different risk levels. The higher the classification for a parameter, the higher the level of protection. Our personal care for your safety and our constant quality control, especially for P.P.E. of complex design, guarantees our excellent quality performances.

When no Standard is available and/or a model is not a P.P.E., then of course, no CE/UKCA marking is required.

More information about the standards.

Exterior

  • Zip closure under flap with press studs
  • Straight collar
  • fall arrest harness can be fitted in
  • Elongated back, Elasticated waist
  • Sleeve narrowing by touch & close fastening
  • 2 inset pockets with zip closure, 2 inset chest pockets
  • Bi-stretch waterproof Pezaflex Aqua reinforcements with retro-reflective piping on the shoulders
  • Ventilation on the back, Ventilation under arms

Interior

  • Nylnet lining for an optimal wearing comfort (100% polyester)
  • 1 patched First Aid pocket with zip closure on the left side
  • 8 layer arm, shoulder and chest protection, 8 layer additional abdominal protection

Wash & Care Instructions

Our products are light, comfortable and easy to maintain. Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

Extend service life of your garments

Fabric

  • Waterproof Tektor reinforcements (68% polyester - 32% polyamide with polyurethane coating ±345g/m2)
  • High performance full stretch TeXXion HV outer fabric (89% polyester - 11% elastane; ±250 g/m²) with water-and dirt repellent Teflon™ finish
  • High performance water- and dirt repellent with Teflon™ full stretch TeXXion (87% Cordura® - 13% elasthane ±240g/m2)
Information about all our qualities
Texxion
Tektor